Projects
| Roof and metal sheeting refurbishment project using the RostFort range of rust control products |
 |
Our client had rusted metal
sheeting and roofs. The rust damage ranged from heavy rust to light rust. Sandblasting was not a viable option due to environmental impact. The integrity of some of the metal sheeting would be compromised if sandblasted. The metal sheeting and roof required a metal primer and rust protection to be applied. A generic top coat was applied for aesthetic purposes. Our client required seven years minimum rust protection. |
| Step one - surface preparation by removing loose rust, dirt and grease using RostPrep |
 |
 |
The metal sheeting and roof was in poor condition |
 |
 |
RostPrep rust
remover is applied to the surface. The chemical reaction will loosen
rust, oil and grease from the surface. Once left for 20 - 30 min, simply was off with water and a high pressure spray. |
| Step two - apply RostFort rust converter and metal primer to the surface and apply generic top coat of paint |
 |
The metal sheeting after applying RostFort H20 and top coat paint |
 |
The metal sheeting after applying RostFort H20 and top coat paint |
 |
Before and after pictures of the metal sheeting and roofs |
| Roof refurbishment project using the RostFort Silver rust control product |
 |
Our client had a few rusted metal roofs
situated in an industrial area. The rust damage ranged from heavy rust to light rust. Sandblasting was not a viable option. The roof required a metal primer and rust protection and top coat to be applied. A generic top coat was applied for aesthetic purposes. Our client required seven years minimum rust protection. |
| Step one - apply RostFort Silver to the rusted surface |
 |
The rusted roof before preparation |
 |
The rusted roof during application of RostFort Silver |
 |
The roof after applying RostFort Silver three-in-one rust control product |
| Rust refurbishment of a metal plate |
 |
The rusted metal plate before preparation using RostPrep rust remover |
| Step one - surface preparation by removing loose rust, dirt and grease using RostPrep |
 |
The rusted metal plate during preparation using RostPrep rust remover |
 |
The rust is being loosened and after washing with water, the surface is prepared for the application of the RostFort range of rust converters |
| Step two - apply the RostFort range of rust converters to prevent rust from re-occurring |
 |
The rusted metal plate after partially applying RostFort ST |
 |
The rusted metal plate after the application of RostFort ST Black |
 |
The rusted metal plate after the application of RostFort Silver |
| Rust control project for a townhouse complex - gates, car ports and metal structures |
 |
Our client had rusted gates and
car ports. The rust damage ranged from heavy rust to light rust. The structures required rust removal, a metal primer and rust protection and top coat to be applied. A generic top coat was applied for aesthetic purposes. Our client required five years minimum rust protection. |
| Gates - remove rust, apply metal primer and rust protection (RostFort ST) and top coat paint |
 |
RostPrep was applied to remove
the rust. RostFort ST was used as a metal primer and rust protection.
A black enamel top coat was applied. |
 |
RostPrep was applied to remove
the rust. RostFort ST was used as a metal primer and rust protection.
A brown enamel top coat was applied |
| Car ports - remove rust, apply metal primer and rust protection (RostFort ST) and top coat paint |
 |
 |
RostPrep was applied to remove
the rust. RostFort ST was used as a metal primer and rust protection.
A brown enamel top coat was applied. |
| Other metal structures - remove rust, apply metal primer and rust protection (RostFort ST) and top coat paint |
 |
RostPrep was applied to remove
the rust. RostFort ST was used as a metal primer and rust protection.
A grey enamel top coat was applied. |
 |
RostPrep was applied to remove
the rust. RostFort ST was used as a metal primer and rust protection.
A black enamel top coat was applied. |
